JXF Series Wall-Mounted Low-Voltage Power Control Box
JXF Series Wall-Mounted Low-Voltage Power Control Box
+
  • JXF Series Wall-Mounted Low-Voltage Power Control Box
  • JXF Series Wall-Mounted Low-Voltage Power Control Box

JXF Series Wall-Mounted Low-Voltage Power Control Box


This product is suitable for circuits with an AC frequency of 50 Hz and a rated operating voltage of 500 V or lower. Under special requirements, the protection rating can reach IP5. It features knock-out holes, and multiple conduit entries can be accommodated via pre-installed removable mounting plates. The maximum rated current can reach 400 A. This product is particularly well-suited for metering switchboards used by industrial, mining, and hotel customers. The product’s enclosure protection rating is IP53.

Scope of application

  This product is suitable for circuits with an AC frequency of 50 Hz and a rated operating voltage of 500 V or lower. Under special requirements, the protection rating can reach IP5. It features knock-out holes, and multiple conduit entries can be accommodated via pre-installed removable mounting plates. The maximum rated current can reach 400 A. This product is particularly well-suited for metering distribution boxes used by industrial, mining, and hotel customers. The product’s enclosure protection ratings are all IP53.

  The product complies with: IEC60439.1-1993 “Low-Voltage Switchgear and Controlgear Assemblies” and GB7251.1-2005 “Low-Voltage Switchgear and Controlgear Assemblies.”

 

Model and Meaning

 

Operating environment conditions

1. Temperature: The ambient air temperature shall not exceed +40℃, and the lower limit of the ambient air temperature is -50℃.

2. Humidity: When the maximum temperature is +40℃, the relative humidity of the air shall not exceed 50%. At lower temperatures, higher relative humidity levels are permissible—for example, up to 90% at +10℃.

3. Altitude: The installation location must not exceed an altitude of 2000 m.

4. Installation category: Class II;

5. Pollution Level: Grade 3.

 

Structural features

The structure is welded from thin steel plates, and measuring instruments, pushbuttons, indicator lights, and control switches can be mounted on the door. Other electrical equipment, such as contactors, relays, and terminal blocks, should all be installed on strip racks inside the enclosure. The upper and lower walls of the enclosure are equipped with knockout holes, facilitating the installation of various types of electrical cables and conduit systems of different specifications.

 

Main Technical Parameters

Rated operating voltage 230V 400V
Rated operating current 400A
Rated short-circuit breaking capacity 80KA
Enclosure protection rating IP55

 

External Dimensions and Installation Dimensions

Exterior installation diagram

Keywords: JXF Series Wall-Mounted Low-Voltage Power Control Box

If you have further needs, feel free to leave a message—we’ll reply to you as soon as we receive your message!

Send now